8
Maintenance
This machine is practically maintenance free. Use a soft brush to clean the
hopper, stacker and the feeder gap in regular intervals. Pay special attention to the
two-part sensor in the stacker and the sensor couple in the hopper to keep them
dust free.
Clean the body of the machine with a moist (but never wet) lint free cloth when
needed. Do not use aggressive or abrasive cleaners.
If the machine is not in use pack it, preferably in the original box, and keep it
away from excessive heat, cold or humidity.
Do not operate the machine with a damaged power cord and observe electrical
safety and your local regulations at all time.
Operation
The machine comes with a standard setting for the purpose it is ordered for. It is
up to the user to set up the machine for testing specific features that deviate from
the standard setting. Many currencies other than the one the machine is specially
made for can be counted as well, but it needs some testing and experimenting. If
you get familiar with the machine, you will see it is easy to count notes with basic
security features like magnetic ink as easily as the currency the machine was built
for. Some safety features of other notes may be in locations that are not checked
by the machine. In such case, only counting with some or all verifications turned
off is always possible.
Make sure that the hopper guides are set as narrow as possible. Please adjust them
to be not wider than the widest note. The arrows under the hopper guides shall
remind you off this.
Normally a machine like this, if it's not a mix note machine, is used to count the
number of notes of the same denomination, and all notes different from the first
note will be rejected. The non-MIX machine, in standard setting, expects that all
notes be of the same denomination. It is easy to spot larger notes. Smaller notes
will be rejected by the machine during the detection process. Please note that the
first note counted, that is the note at the bottom of the stack, and that note will set
the standard for the size/denomination comparison. The user has to make sure that
the bottom note is a correct one.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels